Plains Equipment Group is committed to meeting the needs of their multi-faceted community. With locations in Nebraska and Kansas to better serve your equipment needs.

John Deere 1600 Turbo

CroppedImage500278-1600-large.jpg

1600 Series

 

  • Turbocharged diesel engine
  • Biodiesel kit available
  • Rear-discharge decks
Manufacturer John Deere
Model 1600 Series II Turbo WAM (2016)
Engine  
Manufacturer  ---  
Model  4TNV84T-ZDJWM (IT4)  
Displacement  122 cu in. 
   1995 cc 
Bore and stroke  3.3x3.5 in. 
   83.8x88.9 mm 
Injection  Direct  
Starting aid  Air heater  
Cylinders  Four  
Cycle  Four  
Horsepower (gross intermittent)  Gross power SAE J1995 at 3,000 rpm, PS 58.1 hp 
   42.7 kW 
Rated engine speed  3,000 rpm 
Operating range  With isochronous governor 1,400-3,200 rpm 
Lubrication  Pressurized by lobe-style pump  
Oil filter  Spin-on  
Cooling  Liquid-cooled water centrifugal  
Cooling system capacity  2.5 U.S. gal. 
   7.5 L 
Crankcase capacity  6.1 U.S. qt 
   5.8 L 
Compression ratio  19:1  
Operating torque (net continuous @ 3000 rpm)  97 lb-ft 
   131.5 Nm 
Max Torque per SAE J1349 (net continuous)(Nm)  117.3 lb-ft 
   159 Nm 
Air cleaner  Dual element, dry type  
Air restriction indicator  Standard, progressive type  
Engine shutoff  Key  
Radiator location  Rear mounted  
Radiator fins per inch  10 fins per inch  
Horsepower (net intermittent)    
Fuel system  
Fuel type  Diesel  
Fuel transfer pump  Electric  
Fuel filter  Replaceable, spin-on type  
Water separator  Replaceable, 100-mesh element  
Cold start device  Increased timing for better cold starting  
Fuel capacity  22 U.S. gal. 
   83.3 L 
Fuel pump type  Mechanical  
Fuel neck opening  3 in. 
   7.6 cm 
Fuel tank location  Left side of the machine  
Self bleeding  System is self-bleeding because of the electric fuel transfer pump  
Fuel consumption  
Full load  3.33 U.S. gal./hr 
   12.7 L/hr 
One-half load  1.93 U.S. gal./hr 
   7.31 L/hr 
Implement lift  
Type  Hydraulic, open center  
Lift cylinders  Bore 2 in. 
   50.8 mm 
Pump  Gear  
Electrical  
Charging system  Automotive type  
Alternator  55 amp 
Battery voltage  12 V 
Battery cold crank amps  650 amp 
Starter size  1.9 hp 
   1.4 kW 
Hydraulic system  
Traction drive pump  Displacement, axial piston pump 3 cu in. 
   49 cc 
Motor  Displacement, axial piston pump 2 cu in. 
   33 cc 
Type  Closed loop, hydrostatic  
Steering relief  1050 psi 
Implement relief  1600 psi 
Hydraulic reservoir capacity  14 U.S. gal. 
   53 L 
Drivetrain  
Transmission type  Hydrostatic  
Transaxle type  Dual range  
Transaxle  Tuff Torque (Kanzaki)  
4 wheel wrive  On demand or full time  
4 wheel drive type  Mechanical rear-wheel drive  
Differential lock  Mechanical, foot activated  
Final drive  Planetary  
Brakes  
Type  Internal, wet disc  
Steering brakes  Standard  
Parking brakes  Hand brake  
Travel speed at 3000 rpm  
Low forward speed  0-8.6 mph 
   0-13.8 km/h 
High forward speed  0-14.4 mph 
   0-23 km/h 
Low reverse speed  0-4.3 mph 
   0-6.9 km/h 
High reverse speed  0-7.2 mph 
   0-11.5 km/h 
Sound level (without cab)  
With deck  93 dBA 
Without deck  89 dBA 
Frame  
Frame type  Welded, tubular steel  
Thickness  11 gauge 
   0.120 in. 
   3.05 mm 
Steering  
Type  Power, hydrostatic  
Tilt steering wheel  Standard  
Turns lock-to-lock  2.5  
Turning radius  39 in. 
   99 cm 
Operator station  
Seat  Air-ride suspension seat, adjustable, deluxe, high-backed, back angle adjustment, standard armrests  
Adjustment positions  Three  
Armrests  Yes  
Safety  Safety interlock and operator presence system  
Tires  
Drive tires (front)  26x12-12  
Pressure  30 psi 
   206.8 kPa 
   28 psi 
   193.1 kPa 
Steering tires (rear)  18x9.5-8  
Tread  Multi-trac  
Ply rating  6 PR (both)  
Dimensions  
Length (with deck)  132 in. 
   335 cm 
Wheel base  60 in. 
   152 cm 
Tread width  52 in. 
   131 cm 
Width with decks down  134 in. 
   340 cm 
Height with ROPS  ROPS up - 98 in. 
   249 cm 
   ROPS down - 74 in. 
   188 cm 
   With four-post canopy ROPS - 82 in. 
   208 cm 
Transport width  84 in. 
   213 cm 
Ground clearance  6.5 in. 
   16.5 cm 
Uncut circle of grass w/o brakes  ---  
Vehicle weight  4,173 lb 
   1,892.8 kg 
Machine weight without the deck  3,264 lb 
   1,474.2 kg 
ROPS  
Type  Standard two-post folding ROPS or four-post canopy ROPS meets ISO21299 standard  
Controls  
Throttle  Hand  
Forward/reverse  Two-pedal  
Mower lift  Three two-function switches  
Park brake  Foot pedal/disk  
Indicator lights  Engine air heater, oil pressure light, engine temperature light, fuel gauge, hydraulic oil temperature light  
PTO engagement  Electric solenoid switch  
Type  Hydraulic, independent  
PTO engagement/disengagement  Electric solenoid  
Deck drive pump  Displacement, axial piston pump 2.48 cu in. 
   40.6 cc 
Deck motor  Displacement, gear motor 2.5 cu in. 
   41 cc 
Type  Hydraulic, open center, closed loop  
Circuit  Series  
Mower decks  
Deck drive type  Hydraulic, closed loop  
Spindles  Heat treated, diameter 1 in. 
   2.54 cm 
Spindle bearings greaseable  Yes  
Energy-absorbing wing decks  Yes  
Deck circuit  Series  
Blade drive  C-section, V-belt  
Cutting widths  62, 94, 128 in. 
   157, 239, 325 cm 
Center deck cutting width  62 in. 
   157 cm 
Wing deck cutting width  42 in. 
   107 cm 
Transport lock  Standard  
Discharge  Rear  
Deck construction  Fabricated steel  
Deck thickness  7 gauge 
   0.179 in. 
   4.6 mm 
Height-of-cut range  1-5.5 in. 
   2.5-13.9 cm 
Wing deck float  ---  
Up (while maintaining PTO engagement)  45 degrees  
Down (while maintaining PTO engagement)  20 degrees  
Mowing rate  
80% field efficiency  85% field efficiency at 10 mph (16 km/h)  
   11 acres/hr 
Anti-scalp rollers  
Type  Flat-free  
Wing deck caster wheels  Four 11x4-5 flat-free  
Front deck caster wheels  Two 11x4-5 flat-free  
Blades  
Total mower blades  Seven, three center and two each side  
Blade length  22 in. 
   55.88 cm 
Blade width  2.5 in. 
   6.35 cm 
Blade thickness  0.312 in. 
   0.79 cm 
Blade tip speed  13,000 fpm 
   3,962 m/min 
Interchangeable mower blades between all decks  Yes  
Miscellaneous information  
Warranty  2 years  
Certification  ANSI B71.4-2004  

Fields with asterisks* and highlighted red are required. Please email our helpful staff with any questions or comments using the contact form.

Fields with asterisks* and highlighted red are required. Your friend will receive an email that contains a reference to this page. Please send this email only to people you know who would be interested in this information.

We Are “Committed To Your Success!” Contact Us Today!