Plains Equipment Group
Search Used Inventory    Search Products & Site

Utility Tractor Attachments H380

Double tap to zoom

 

Features

Boom lockout for easy service

A hydraulic shut-off valve is included with the H-Series Ag Loaders to ensure the loader does not lower suddenly. For example, this allows the boom to be locked out when someone is required to be located under the loader boom for service work on the tractor. It should not be used for extended periods of time unless an appropriate support stand is also utilized.

Concealed oil lines improve appearance and reduce damage

Over time, increased width in tractor hoods have caused issues with available space for running traditional oil lines of a loader along the boom, making them more susceptible to damage. 

To improve this situation, the oil lines have been routed through the boom arm and the torque tube, improving line protection and the appearance of the loader.

Loader removal (parking) made easy

John Deere loaders are easily removed and reinstalled on tractors without tools. The parking system allows removing or attaching the loader to the tractor in minutes without the need for tools.

To remove or park the loader, apply slight down pressure to the loader boom with the bucket dumped at approximately a 30-degree angle. With the tractor in park, install the parking stands and place the mast pins in the open position.

To remove or park the loader, apply slight down pressure to the loader boom with the bucket dumped at approximately a 30-degree angle. With the tractor in park, install the parking stands and place the mast pins in the open position.

With the tractor in park, shut the engine off and relieve the hydraulic pressure as indicated for the tractor. Relieve pressure on the single-point hydraulic connection, then disconnect or open the single-point hydraulic connector.

Store the loader half of the single-point connector. The tractor is now ready to back away from the loader.

False rod bucket cylinders improve productivity

Fast bucket cycle times are important to dump the load from the bucket as quickly as possible, (quite often) in order to be as productive as possible, while completing loading operations. The bucket cylinder design can have a major impact on this cycle time, especially for the mechanical self-leveling loaders.

Therefore, all MSL H-Series Loaders utilize false rod bucket cylinders. A false rod cylinder has a smaller displacement of oil requirement on the head end of the cylinder, which allows this cylinder to dump much faster than a normal cylinder.

Single-point hydraulic connection saves time

The H380 Loader features a single-point hydraulic connection that also incorporates the connection point for any electrical needs in base machine. To disconnect the hydraulic connection between the loader and the tractor, it is necessary to relieve the hydraulic system oil pressure on the tractor.

Specifications

TRACTOR ---
Model 6170M
Front tire 540/65R34
Rear tire 710/70R42
Front axle configuration MFWD w/ Limited Slip Differential
Wheelbase 2800 mm (110.2 in.)
Pump capacity 114 L/min (30 gpm)
Rated pressure 200 bar (2900 psi)
LOADER ---
Leveling configuration Mechanical Self Leveling (MSL)
Bucket used Global Heavy-Duty Bucket 2450 mm (Global Heavy-Duty Bucket 96 in.)
Bucket weight 375 kg (825 lb)
Lift capacity at full height Measured at pivot (U) 1896 kg  (4171 lb); Measured at 800 mm ahead of pivot (V) 2056 kg (4523 lb)
Lift capacity at 59 in. (1500 mm) Measured at pivot (W) 2938 kg (6464 lb); Measured at 800 mm ahead of pivot (X) 2795 kg (6149 lb)
Boom breakout force Measured at pivot (Y) 3691 kgf (8120 lbf); Measured at 800 mm ahead of pivot (Z) 3275 kgf (7205 lbf)
Bucket rollback force capacity At maximum height (VV) 2611 kgf (5744 lbf); At 59-in. (1500-mm) lift height (XX) 4909 kgf (10800 lbf); At ground-level line (ZZ) 4782 kgf (10520 lbf)
Dimensions Maximum lift height (A) 4499 mm (177 in.) At full height - bucket level (B) 4290 mm (169 in.); At full height - bucket dumped (C) 3438 mm (135 in.)
Overall length (I+F), ft (m) 5.4 m (17.8 ft)
Digging depth (H) 157 mm (6 in.)
Reach At maximum height (D) 917 mm (36 in.); At ground level - bucket level (F) 2621 mm (103 in.)
Bucket angle Dump angle, degrees (E) -69 degree (angle); Rollback angle, degrees (G) 44 degree (angle); Dump angle, ground -91 degree (angle)
Cycle times Loader raise, seconds 4.1 seconds; Loader lower, seconds 2.6 seconds; Bucket dump, seconds 1.8 seconds; Bucket rollback, seconds
1.8 seconds